Satellite info

The equipment needed.

1. Receiver XSAT CDTV410 available from Transplanet

2. Infinity USB programmer and GoldCard from Geronimo's ChipCardStore

Getting it all to work.

1. Download software for your PC to communicate with your XSAT410 HERE

2. Download modified firmware for your XSAT410 HERE

3. You then need to make a cable to upload the software to the XSAT410 from your PC. Any wire will do the instructions are included in the communication software. A little tip is to use little spade connectors on the ends of the cable instead of buying an expensive cable ready made.

4. Upload the modified firmware from your PC to the XSAT410

5.Using the Infinity USB programmer program a GoldCard with a Viaccess hex file available from HERE be sure to download files for GoldCard only as other will not work.

6. Place card into XSAT410 and enjoy.