Mountney Boss horn fitting

1. Make sure you got the right boss.

2. Have a Ford wheel to hand.

3. Remove the center cap and pull off the 2 horn wires (spade connectors).

4. Remove the horn contact ring and withdraw from the back.

5. Unpack your Mountney boss.

6. Fit the horn contact ring into the new boss.

7. Here it is fitted.

8. Next cut the spade connectors off the wires and then crimp or solder onto the Mountney horn.

9. The finish product.

10. Have some beer. (€0.22/£0.15 a tin)