My rifles

Ruger 10/22

It's fitted with a Volquartsen HP+ kit

This kit consists of target hammer with shims, EDM disconnector, EDM sear, and target trigger with overtravel adjustment, trigger plunger with an improved radius, trigger plunger spring, and a special hammer spring. Also included is a recoil buffer to reduce wear on the action and/or bolt, extended magazine release and automatic bolt release.

Butler Creek 10/22® Target Barrel, Fluted, .920-Inch diameter, 20-Inch Length, 416 Stainless Steel, back bored target crown

Hogue OM Synthetic Stock

POWER CUSTOM  Weaver®-Style Receiver Mount/Base (retapped and fitted with bigger bolts)

ACCUSHOT 1 piece 25mm Ring Mount (MED)

Tasco RifleScope 4-16x40mm AO IR

Marlin 25N .22LR

The barrel is now floated from the takedown screw and the stock stripped and finished in Danish oil.

I also did a job on the trigger (lighten) by fitting a lighter return spring and

lightly stoning the sear and trigger with a VERY fine stone just to polish the surface

I have added an extra bedding (takedown) screw to increase stability

CZ 452 .22WMR