repair

Hardware, software, overclocking, new technologies, problems, and much more!

repair

Postby rhys02 » Thu 27 Dec 2007 01:22

how do you repair ur car in lfs as it doesnt seem to repair when i go into the pits ? please some1 help me. and thanks to anyone that does help.
rhys02
125 cc
 
Posts: 5
Joined: Thu 13 Dec 2007 23:05

Re: repair

Postby Speed » Thu 27 Dec 2007 11:32

go into pit and come out again.. :P
Image
Image
User avatar
Speed
2.2L Turbo
 
Posts: 576
Joined: Sat 11 Aug 2007 13:02
Location: Purmerend, Holland

Re: repair

Postby rhys02 » Thu 27 Dec 2007 21:39

but then u lose the amount of laps uve done and the position ur at :(
rhys02
125 cc
 
Posts: 5
Joined: Thu 13 Dec 2007 23:05

Re: repair

Postby Stevo » Fri 28 Dec 2007 00:28

I had this prob, what you do is press f12, it will come up with a list of options, press down arrow on your keyboard, then when highlighted to repair - yes/no, press the right key to change to yes, so then it will repair damage when u pit ;)

hope this helps
(¯`·._.·[Ś†Êvö]·._.·´¯)
User avatar
Stevo
2.2L Turbo
 
Posts: 686
Joined: Thu 30 Aug 2007 20:54
Location: England

Re: repair

Postby Speed » Fri 28 Dec 2007 12:24

didn't knew that, pretty usefull if it works ^^
Image
Image
User avatar
Speed
2.2L Turbo
 
Posts: 576
Joined: Sat 11 Aug 2007 13:02
Location: Purmerend, Holland

Re: repair

Postby rhys02 » Sat 29 Dec 2007 21:27

yes it works like a charm. thans very much for your help :)
rhys02
125 cc
 
Posts: 5
Joined: Thu 13 Dec 2007 23:05

Re: repair

Postby rhys02 » Sat 29 Dec 2007 21:40

ok sorry to be a pest, but how do you get the CT thing fixed as ive done what u said and it fixed the damage but wont fix the CT thing.
rhys02
125 cc
 
Posts: 5
Joined: Thu 13 Dec 2007 23:05

Re: repair

Postby Stevo » Sun 30 Dec 2007 13:41

dont think you can do anything about the CT which = the clutch, when it goes red/high, it means you are burning it, and only way to get the bar to go down, is to stop and turn the engine off to turn it down. The best thing to do is find out what you are doing wrong and try to make cleaner shifts, so that the CT doesent burn as much ;)
(¯`·._.·[Ś†Êvö]·._.·´¯)
User avatar
Stevo
2.2L Turbo
 
Posts: 686
Joined: Thu 30 Aug 2007 20:54
Location: England

Re: repair

Postby Speed » Wed 2 Jan 2008 21:35

Only thing that works is, release your throttle while shifting..
Image
Image
User avatar
Speed
2.2L Turbo
 
Posts: 576
Joined: Sat 11 Aug 2007 13:02
Location: Purmerend, Holland


Return to The computer section

Who is online

Users browsing this forum: No registered users and 1 guest

cron